HiPERFLOOR

Commercial & residential

Husqvarna HiPERFLOOR™ polished concrete system creates an environment where the concrete is the wear surface, not a coating.

Concrete being one of the most versatile products available is transformed into a functional floor finish by using the HiPERFLOOR™ polishing process to create a surface which is substantially abrasion-resistant and long-lasting, making it the perfect option for any high traffic environment.  With a stylish edge, this cost-effective and extremely low maintenance flooring alternative will benefit any new home construction, renovation, or commercial/retail project.

Concretis utilises Husqvarna’s planetary floor grinding machinery, products and latest resin diamond technologies to transform new and existing concrete substrates into a highly durable yet aesthetically appealing surface.

HiPERFLOOR™ Commercial Product Sheet

HiPERFLOOR™ Industrial Product Sheet

HiPERFLOOR™ Premium Finish Product Sheet


FAQ’s

Polished concrete is produced by grinding the concrete surface with diamonds to reveal or expose the aggregate within the slab (new or existing slab). Further grinding with progressively finer diamonds produces a polished finish. The concrete is then sealed with either a topical sealer or a penetrating sealer depending on the type of finish you want.

When you lay a new slab there is a wide range of coloured concretes and coloured aggregates available for you to chose from. These are selected through your builder and/or concrete supplier.

If the right application is applied both internally and/or externally then yes polished concrete will meet the Australia/New Zealand Slip Standard. (Please bear in mind that any floor finish may become slippery if it becomes wet.)

Your floor will be hard enough for foot traffic after 48 hours.

No. Concretis have 3 phase grinders and vacuums that remove all the dust into plastic bags.

Yes. The topical and penetrating sealers used by Concretis are UV Stable.

Typically yes we can polish an existing concrete floor. The concrete would have to be in very poor condition not to be able to achieve a polished concrete finish.

Generally an existing slab can be matched as close as possible. Colour matching can be achieved by staining the concrete once the grinding process has been completed. Please bear in mind though that the colour will be altered when the topical sealer is put on.

This depends on what finish you want on your polished concrete floor. Price varies depending on whether you have a 60 grit, 120 grit or a full Hiperfloor Polished Concrete finish.

See our full concrete placement recommendations here.

Contact us for a free quote &
assessment today

1300 733 813

Brisbane showroom

The Emporium, Shop 11
1000 Ann Street, Fortitude Valley QLD 4006

Gold Coast showroom

3/134 Siganto Drive, Helensvale, Qld 4212

Monday to Friday

8.00am - 4.30pm
*Brisbane closed on Tuesdays